. . .

LegUp LandinGear - Generation II
Harley Dyna Switchback 2012-UP

LegUp™ Gen II Holding up the Bike

Do you sometimes have difficulty managing your bike at slow speeds? Backing up? With a rider? Many do! That is why we came up with LegUp™ LandinGear!

The Patented LegUp™ design was created for those who for whatever reason are concerned about, or unable to hold up these 850 lb monsters as they come to a stop. Older riders, bad knees, bad hips, bad passengers (couldn't resist!), or any other reason someone might want a little help keeping the rubber side down... This will do it!

LegUp™ Gen II - From Behind Our unique retractable stabilization system can help many riders stay on their bikes rather than giving up the sport they love, or resorting to a trike. Using a computer and a pair of pneumatically controlled wheels, LegUp™ deploys these wheels (if desired) as you slow to around six MPH, and automatically retracts them if you accelerate over that speed.

Over eight years ago, Chopper Design introduced the original LegUp™ LandinGear system. Since then, thousands of riders have been helped by it's ability to stabilize their bikes at slow speeds. The GENERATION II system we use today is significantly stronger than it's younger brother. An on-board compressor and a captive air tank, makes this system amazing to watch!

The wheels deploy and retract based on wheel speed; with the .25 second deployment time, we are able to bring the wheels down at a very slow speed (5-6 MPH). The onboard computer controls everything, and a Handlebar switch housing with LEDS allows the rider to communicate with the system and allows the system to talk back!

LegUp™ Gen2, Deployed, Harley The wheels are mounted under the rear floorboards, and tuck up neatly just in front of the bags when not deployed, allowing the bike to be leaned and handle exactly as it always has. You can't do that with a trike or other hokey outrigger systems. The installation Requires no major modifications to the existing bike at all !!

Compressor Tucked Neatly in Saddlebag Our GENII system is in full production NOW for the Harley Switchbacks. Take advantage of our introductory price; the GEN II system will be shipped for $3,500, and we are averaging about a 3 week wait! We will no longer to sell our first generation system for any Dyna models.

If you would like, take a look at our Users Manual, or HD Switchback Install Manual.


PLEASE NOTE: Harley Switchbacks MUST have Harley Rear Floorboard Mounts (Part #49349-07) to install the Generation II System. These mounts (and optional floorboards) are available through your Harley Dealer, or can be purchased through Chopper Design. Factory Saddlebags must remain on the bike to house the compressor system.

This system can be installed on other 06-UP Dyna models with some caveats. Please contact us for details!



Please click on the PHOTOS for a larger view, and watch the VIDEO below. So Far the reaction to the new system has been amazing. People cannot believe how strong the supports are and how stable the bike is with them deployed.

Have a look at the video and see if you don't agree!

Please contact us with any questions at 407-834-5007 or Info@landingear.com.

DEALER INQUIRIES INVITED!

Thanks !!!
Small Logo

LegUp Gen II From Behind Gen II Switchback LegUp™ GenII - Showing Off!